Wood Stripper (1460)

A ready-to-use solution that will remove paint, stains, and varnishes from exterior wood. After stripping, use Superdeck Wood Brightener to restore the natural tone to wood and neutralize prior to coating.

Features

  • Removes exterior latex or oil based paints, stains or varnishes
  • Thick enough to Use on vertical surfaces
  • Non-flammable

Performance

  • Ready-to-Use formula
Clear
Product # SizeColorPDSSDSUPC
DB0014604-16 GalExterior Wood Stripper740755146041

USES:

Ready to use solution that will remove paint, stains and varnishes from exterior wood. It is thick enough to use on vertical surfaces. When staining wood with a transparent or semi-transparent finish, after stripping, use SUPERDECK? Wood Brightener to restore the natural tone to wood.

APPLICATION:

DO NOT DILUTE PRODUCT. Shake well before using. Spray wood with water, then apply Stripper with a brush or roller. Use synthetic brushes or rollers only. Wood Stripper's thick formula may be used on vertical surfaces. To maintain product effectiveness, keep Stripper wet on surface by occasionally misting with water. Allow Stripper to stay wet on surface approximately 15-45 minutes to remove coating. Difficult areas may take longer. Wood Stripper becomes extremely slippery once applied. Work on small enough areas to avoid walking on treated surface. Test a small area to determine the time required for product to strip effectively.

RINSING:

Test a small area by scrubbing with a bristle brush to determine if the coating is easily removed and the surface is ready for rinsing. When ready, scrub the surface with a firm bristle brush or long handled push broom. Rinse thoroughly with water using a garden hose or pressure washer. Do not exceed 1000 PSI when using a pressure washer. Rinse any residue from plants.

BRIGHTENING:

Wood species such as redwood, cedar and fir will tend to darken after being stripped. Use Superdeck? Wood Brightener as the final step to brighten the wood and neutralize the surface before coating.

PRECAUTIONS:

Apply product at temperatures above 50?F. and below 90?F. Do not apply in direct sunlight if possible. Protect any aluminum surfaces (such as window frames) to prevent discoloration. Product will etch metal. If product makes contact with glass, rinse thoroughly before it dries. Mist any nearby vegetation with water before and after application.

COVERAGE:

100-200 sq. ft. per gallon

SAFE USE AND STORAGE:

When using, do not eat, drink or smoke. Wash hands after use and before eating, drinking or smoking. Product is corrosive, avoid contact with metals such as aluminum. Do not transfer contents into a metal container or unlabeled container. Store in well ventilated area. Keep container tightly closed when not in use. Protect from freezing. For exterior use only.

CLEAN UP:

Clean all tools & equipment with water.  

Additional information