All exterior vertical wood such as siding, fences, logs, trim and doors (not for use on decking).
All surfaces must be clean, dry, and free from dirt, mildew stains, dust and other foreign matter. Remove surface stains, dirt and failed oxidized stainswith Superdeck®Wood Cleaner. Remove solid stains or paints with Superdeck®Wood Stripper. For redwood and cedar, follow cleaning or stripping with Superdeck® Wood Brightener to remove tannin stains and brighten wood to its original color. For new wood remove mill glaze with Superdeck® Wood Brightener.
WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.
Product should be shaken or stirred before and during application. When using more than one container of product, intermix all product and stir well to ensure color consistency.
Do not thin.
Packaged Colors - Do Not Tint
Proper application is essential in order to accomplish the full benefits of product appearance and performance. Different wood species, textures and natural color will affect finished shade. Always test a small area first before coating entire job. Saturate surface leaving a wet sheen. Back brush product using smooth even strokes during all application methods. Maintain a wet edge and overlap strokes when applying. Apply product to the entire board lengths to prevent lap marks. Thoroughly coat the porous ends of all boards with several coats.
NUMBER OF COATS:
Two coats are recommended for maximum protection and full coverage. Allow 24 hours dry time between coats.
40°F-95°F. Do not apply if wood surface is hot to touch or if rain is likely to occur..
DRY TIME @ 77 F:
8-12 hours to touch, 24 hours to recoat depending on weather conditions.
Approximate spread rate:
Smooth Surfaces: 400-500 sq. ft./gal.
Rough Surfaces: 250-350 sq. ft./gal.
Clean brushes and equipment with mineral spirits or paint thinner following product manufacturer s directions. Dispose of empty container or unused portion in accordance with local, state, and federal regulations.