7550: Frontier Finish - High Gloss & Satin Sealers
For vertical siding - fences - deck rails - and other exterior vertical surfaces
Superdeck® Brand Products Frontier Finish has been specially formulated to give a clear, non-yellowing protective coating that shields siding, logs, deck railings and other vertical wood surfaces from weathering, fading and water damage.
Protects & beautifies: Frontier Finish is available in Natural for maximum clarity for retaining the existing color of the wood. For extra color and maximum UV protection choose Cedar.
Long-lasting & UV protection: Frontier Finish Sealer is a flexible coating that will not crack during extreme temperature changes and freeze/thaw cycles. A highly-durable Alkyd resin formula is fortified with transparent iron oxide pigments to provide outstanding UV protection and beauty.
Fights water damage: The specially formulated Alkyd resin in Frontier Finish provides a superior water barrier. A highly effective mildewcide inhibits mildew growth on the coating's surface.
Two-coat coverage: Frontier Finish Sealer is a two-coat system that highlights the wood grain pattern and texture, giving maximum protection that won't yellow like other sealers.
Satisfaction guaranteed: We guarantee our satisfaction with the performance of all Superdeck products. See product label for full details.
Trust the brand that is the professional choice -- Superdeck!
Satin and Gloss Finishes
The following samples are shown on bare cedar for maximum clarity.
Gloss Natural
Gloss Cedar
Satin Natural
Satin Cedar
Note: These are the best computer representations of product colors, the wood type used greatly influences the final color of stains and finishes. For best results, test a small area and let coating dry to ensure color satisfaction before completing your project.
SURFACE
PREPARATION: DO NOT APPLY TO WET WOOD. Remove failed oxidized latex or oil base
stainswith Superdeck®
Wood Cleaner. All mildew must be removed, follow Wood Cleaner instructions
for mildew removal.NEW WOOD that has not been kiln dried must be allowed to
season 2 to 4 weeks before applying product. Dry time will vary depending on weather and
moisture content of wood. Wood may be
clean enough to directly apply product. If
not, or if wood has mill glaze, clean redwood & cedar surfaces with
Superdeck® Wood Brightener; clean pressure treated wood surfaces
with Wood Cleaner.WEATHERED WOOD should be free from dirt and other foreign
materials. Thoroughly clean all wood
surface types with Wood Cleaner and rinse. For redwood & cedar, follow with
Wood Brightener to remove tannin stains and brighten wood to its original
color.
PRODUCT
PREPARATION: Product should be stirred from
bottom of container before and during application, do not shake product. When working with more than one container
intermix all product and stir well to ensure color consistency.
THINNING: None required.
APPLICATION
METHODS: Product may be brushed, rolled
or sprayed. Back brush during spray
application in smooth even coats. This
will decrease the possibility of over application and ensure proper dry and
appearance of finish.
APPLICATION: Proper application is essential in order to
accomplish the full benefits of product appearance and performance. Different wood species, textures and natural
color will affect finished shade. Always
test a small area first before coating entire job. Saturate surface leaving a wet sheen. Back brush in smooth even coats during all
application methods. Maintain a wet edge
when applying. Apply product in entire
board lengths to prevent lap marks. Thoroughly
seal the porous ends of all boards with several coats.
APPLICATION
TEMPERATURE: 40ºF - 95ºF. Do
not apply if wood surface is hot to touch or if rain is likely to occur.
NUMBER OF COATS:Two coats are recommended for
maximum protection and full coverage. Allow 24 hours dry time between coats.
DRY TIME @ 77ºF: 8-12 hours to touch, 24 hours
to re-coat. Cold temperatures and high
humidity may require additional drying time.
You can find Duckback Products throughout the United States and Canada at independent hardware stores, paint dealers and other retailers who are committed to quality product lines and excellent customer service.
Our dealers can provide you with advice to assist you with color choices, how-to tips and professional assistance.
For information and expert advice about our full product line please call 1-800-825-5382, Monday-Friday, 7am-5pm (PST), or email our customer service representatives at: customerservice@superdeck.com
Internet Order Option:
If you would like to place an order TODAY for shipment to your home or business, visit one of our e-tailing partners.
Authorized DUCKBACK PRODUCTS internet suppliers that sell paint/stain products online. Click on the image for a link to the website.
