 |
|
| Epoxacryl Solid Color Concrete Stain |
| 6200 Series: Epoxacryl Solid Color Concrete Stain | |
 Mason's Select® Epoxacryl™ Solid Color Concrete Stain is a unique blend of Epoxy resin and 100% acrylic latex. This advanced technology offers the maximum durability of Epoxy and the ease of application of 100% Acrylic Latex in a ready to use one part system.
Beautifies and protects: Mason's Select Epoxacryl Solid Color Concrete Stain beautifies concrete surfaces while offering maximum resistance to chemicals, marring, scuffing and hot tire pickup.
Long-lasting color, UV protection & fights water damage: The advanced technology of Epoxacryl Solid Color Concrete Stain makes it ideal for interior and exterior concrete surfaces, including garage floors, driveways, patios, porches and walkways.
Safe & easy to use: Epoxacryl Solid Color Concrete Stain is a waterborne product and cleans up with soap and water.
The benefits of Epoxy in a one part system.
Satisfaction guaranteed: We guarantee your satisfaction with the performance of Mason's Select products. See product label for full details.
|
| Factory Ready Tints/Bases | |
 |
 |
 |
 |
 |
| 6201 White
|
6202 Gray
|
6203 Red
|
6204 Brown
|
6205 Green |
|
| Custom Tint Colors - Formulas Available | |
Custom Colors
|
 |
 |
 |
 |
| Ivory |
Mint Cream |
Seashell |
Chiffon |
 |
 |
 |
 |
| Saffron |
Wheat |
Goldenrod |
Sand |
 |
 |
 |
 |
| Golden Tan |
Scarlet |
Burgundy |
Sangria |
 |
 |
 |
 |
| Bordeaux |
Sandy Brown |
Apricot |
Coral Pink |
 |
 |
 |
 |
| Thistle |
Tea Rose |
Canvas |
Desert Sand |
 |
 |
 |
 |
| Fallow |
Chocolate |
Coffee |
Pale Blue |
 |
 |
 |
 |
| Charcoal |
Burlywood |
Olive |
Forest Brown |
 |
 |
 |
 |
| Lavender Gray |
Lilac |
Purple Haze |
Stone Hedge |
 |
 |
 |
 |
| Slate Blue |
Steel Blue |
Light Slate |
Gray Stone |
 |
 |
 |
 |
| Granite |
Quartz |
Slate Gray |
Silver |
 |
 |
 |
 |
| Platinum |
Taupe Gray |
Stone Gray |
Dusky Green |
 |
 |
 |
 |
| Hunter Green |
Fern Green |
Myrtle |
Mint |
| Caribbean Collection |
 |
 |
 |
 |
| Turquoise |
Robins Egg |
Periwinkle |
Buttercup |
 |
 |
 |
 |
| Flamingo |
Sea Green |
Lavender |
Ocean Blue |
|
Note: These are the best computer representations of product colors, the existing concrete conditions greatly influence the final color of stains and finishes. For best results, test a small area and let product to dry to ensure color satisfaction before making your final color selection.
|
| MSDS | |
Mason's Select Solid Color Concrete Stain meets all current regulations for Volatile Organic Compounds (VOCs).
|
| Application Instructions | |
READ ALL DIRECTIONS AND PRECAUTIONS BEFORE BEGINNING.
WHERE TO USE: Interior or exterior concrete surfaces such as garage floors, driveways, patios, porches and walkways. Do not use on areas subject to hydrostatic pressure or standing water. Not for industrial use or areas subject to forklifts.
SURFACE PREPARATION: The success of a coating for concrete is always dependent on the proper surface preparation. ALWAYS START WITH A CLEAN AND DRY SURFACE. Concrete surfaces must be free of dirt, wax, grease, oil, and other contaminants. Clean grease and oil with Mason's Select® Concrete Cleaner and rinse thoroughly. New concrete must cure for at least 30 days prior to application. Moisture content of concrete may be tested by taping an 18" x 18" polyethylene sheet approximately 4 mils thick over the concrete and leave in place for 16 hours. If there is no moisture accumulated on the sheet you may proceed. If there is moisture present then allow concrete to dry for several days and re-test. Previously sealed, stained, or painted concrete must be properly prepared. Remove all loose or peeling paint and de-gloss surface by sanding with 150-200 grit sand paper. Follow by cleaning with Concrete Cleaner, rinse thoroughly and let dry
ETCHING THE CONCRETE SURFACE: Etching smooth concrete will allow coatings to penetrate and adhere to the concrete. Coatings can peel or be rapidly worn away from smooth concrete. It is imperative to the performance of coatings that the surface be coarse enough to allow penetration and adhesion. Concrete surfaces must be rough to the touch or have a texture as rough as 120 grit sandpaper. Bare concrete surfaces that are especially smooth, non-porous, which will not readily absorb water (such as garage floors) must be etched. Test bare concrete surfaces by sprinkling with water. If water does not readily absorb into concrete proceed to etching. Mason's Select® Safe Solution is non-corrosive, biodegradable, and easy to use. Simply apply Safe Solution, let it work for approximately 30 minutes, scrub and rinse with water. If surface does not have consistency of 120 grit sandpaper, reapply. Once etching is completed, surface must be neutralized using Concrete Cleaner. Follow Concrete Cleaner instructions for neutralizing concrete surfaces. PROFILING OR ETCHING THE CONCRETE PRIOR TO STAINING IS HIGHLY RECOMMENDED FOR MAXIMUM PERFORMANCE.
PRODUCT PREPARATION: Shake well or stir thoroughly from bottom to top of container and occasionally during application. If more than one gallon is used, intermix all containers to ensure color uniformity. Do not thin. Product is ready to use. Non-skid additives may be added to create a non-skid coating.
TEST AREA: Always apply product to a small test area and allow to dry before staining entire project to ensure desired color and appearance.
APPLICATION: Apply using a high quality nylon/polyester brush, roller, or sprayer. Back rolling or brushing is suggested when spraying, working the product smoothly and evenly into the concrete to ensure a uniform appearance. Always maintain a wet edge to avoid lapping. Two coats are recommended for maximum durability and product performance. Apply product at temperatures above 50ºF and below 90ºF. Do not apply in extreme heat of day or in direct hot sunlight. Do not apply if rain is likely to occur.
COVERAGE: 300-500 sq. ft. per gallon depending on surface texture and porosity.
DRY TIME: 1 hour to touch. 4 hours before applying second coat. 24 hours for light foot traffic. 72 hours for heavy foot traffic. Allow a minimum of 7 days dry time before subjecting to automotive traffic. Premature traffic could cause coating to lift. Dry time can be affected by temperature and humidity. Dry time may be prolonged in cooler temperatures.
TINTING: Product may be tinted using up to 8 ounces per gallon of compatible machine colorants.
|
| Where to Buy Duckback Products | |
You can find Duckback Products throughout the United States and Canada at independent hardware stores, paint dealers and other retailers who are committed to quality product lines and excellent customer service.
Our dealers can provide you with advice to assist you with color choices, how-to tips and professional assistance.
For information and expert advice about our full product line please call 1-800-825-5382, Monday-Friday, 7am-5pm (PST), or email our customer service representatives at: customerservice@superdeck.com
Internet Order Option:
If you would like to place an order TODAY for shipment to your home or business, visit one of our e-tailing partners.
Authorized DUCKBACK PRODUCTS internet suppliers that sell paint/stain products online. Click on the image for a link to the website.
|
|
|
|
